Month: March 2023

6 Reasons Why You Shouldn’t Ignore Solar Metering

by vemcoblogs -
Solar Power Company

If you are generating more solar energy than you are consuming, the excess electricity is diverted to the grid and you are compensated for it by deducting the units you purchase from the grid. This simple concept is known as Net Metering.

As any top solar company will tell you, solar energy is gaining a lot of traction the world over and producers must be aware of Net Metering to make the most of their investment in solar power systems. VEMC is a leading Solar EPC Company based in Mumbai.

In This Blog, We Explain 6 Reasons Why You Simply Shouldn’t Ignore Solar Metering:

Lower Electricity Bill

With net metering, you only pay for the ‘net’ amount of electricity that you consume, that is, total electricity imported from the grid minus electricity exported from your solar power system. Besides, the extra electricity units can be used during those hours when sunlight isn’t enough such as at night.

Easy Installation With Fewer Components

There is no need to have a backup generator in net-metered solar power systems. The electricity grid itself acts as one. The lack of elaborate equipment and components makes the net-metered solar system an absolute winner. It also means that the initial costs of installing solar power systems come down significantly. For expert advice on this, get in touch with VEMC –– a top solar EPC company in its segment.

Lesser Environmental Impact

Solar energy is the most preferred unconventional source of energy, especially in terms of environmental impact. But when net metering is added to the equation, it further boosts the environmental benefits as it encourages users to switch to solar energy. Net metering, therefore, helps remove or reduce the reliance on conventional and polluting sources of energy like fossils.

Increased Financial Credit

Net metering provides owners of solar power systems an opportunity to generate revenue by selling the excess units to the grid. This acts as a financial motivator and helps owners increase their financial credibility by creating an asset that becomes a perpetual source of income.

Cost-Effective and Hassle-Free Maintenance

Net metering does away with components like batteries and generators –– the two that require the highest attention and maintenance. Thus, with net metering in place, your solar power systems become more cost-effective and have hassle-free maintenance.

Lesser Network Issues

With the increased number of consumers exporting their excess units to the electricity grid, the chances of blackouts and outages are successively reduced. Issues such as transmission line congestion can be significantly reduced thanks to net metering. An expert solar EPC company like VEMC will be able to tell you more about this.

Conclusion

If you want to install a solar system or have any queries regarding metering, do not hesitate to reach out to us. We will be happy to help you leverage net metering to make your place of work a shining example of the effectiveness of renewable energy. We are a leading Solar Power Company and can be reached at 022 43436655 or emailed at marketing@vemc.co.in.

How To Use Solar Energy in Your Daily Life To Create a Sustainable Earth?

by vemcoblogs -

What is Solar Energy in Simple Terms?

Solar energy simply refers to the energy coming from the sun in the form of insolation. When this insolation is tapped and converted into electricity using photovoltaic cells, it is known as solar power. Today, solar power is being put to use in a vast number of ways, be it domestic or commercial. VEMC is the Best Solar Company in Mumbai, with a reputable client base across sectors.

What Are The Advantages of Solar Energy?

• Control Over Consumption ––

For starters, solar energy offers a level of certainty in times when high electricity costs and regular outages have become a feature of the energy market. When the electricity charges hit peak prices, consumers can switch over to solar, and avoid paying hefty sums for their consumption. With a Solar EPC company like VEMC, this has become much more convenient than ever before.

• Green Energy ––

Unlike fossils and other conventional sources of energy, solar doesn’t have a huge impact on the environment. It doesn’t cause air, water or noise pollution. In times when emission-free energy has become the buzzword, solar energy perfectly fits the bill.

• Universal Use ––

The sun is the single source of solar energy and this makes it possible for companies to take solar power to the remotest destinations, where setting up power projects and transmission lines could be a tough ask. Independent solar power systems can make electricity available to local populations and bring about a huge difference in their standard of living. VEMC is hands down the best solar company when it comes to catering to such ambitious projects.

• Energy Buffer ––

If not to replace the main source of power completely, solar can be used to fill in for the hours when electricity isn’t available, outages are frequent, or the prices are very high. Any top solar energy company will recommend these manoeuvres to its clients, helping them meet their cost or operational objectives.

• Improved Grid Security ––

An energy grid widely punctuated by independent solar power systems is less sensitive to blackouts due to say human-made disasters, as consumers can continue to draw power from this alternate pool of energy. A leading solar energy company of the country, VEMC enables clients and partners to enhance their business continuity plans with the help of solar power.

How Can You Use Solar Energy in Your Daily Life?

Solar energy can be put to use in myriad ways in your domestic life:

• To run home appliances such as TVs, computers, fans, etc.

• To heat up swimming pools, drinking water and rooms

• To charge mobile devices, laptops, etc.

• Solar cooking using solar cookers

• Solar lighting for houses, gardens and streets

Want to know more about how solar energy can make a difference in our fight against climate change and carbon emissions? Get in touch with our experts at 022 43436655 or email us at marketing@vemc.co.in. We are the best solar company in Mumbai and a leading Solar Energy Company across the country.

Do’s and Don’ts of the Pump World!

by vemcoblogs -

Industrial Water Pumps in Mumbai
Kirloskar Pumps Distributors

Pumps are one of the most universally used equipment to boost pressure or lift fluid in households, industries and emergency situations. We use a range of different pumps for different types of work such as electric-driven pumps, rotary pumps, multi-stage pumps, etc. As leading Kirloskar Pumps Distributors and experts in pumping, we talk about all the do’s and don’ts of the pumping world that you as a pump owner need to be aware of.

Do’s and Don’ts of Electric Driven Pumps:

Do’s ––

• Have all the proper control devices in place before starting the pump.

• Always keep the installation and operation manual for the pump, motor and control panel handy for instructions on proper use.

• Secure all the electrical connections and avoid having loose connections as this could be dangerous for operators.

• Secure all the piping connections properly to avoid leakages in the pumping system enabling it to perform optimally.

• As soon as the water supply begins, make sure the direction of rotation is correct.

Don’ts ––

• Don’t allow any unsupervised operation of the pump, especially by inexperienced personnel.

• Do not ignore the safety and health precautions as mentioned in the manual provided by the supplier.

• Do not continue to run the pump despite unusual vibrations and sounds.

• Don’t continue to run it if the pump is drawing extraordinary power.

• Don’t make the cable accessible to unauthorised personnel.

For more in-depth details, call reputed Kirloskar pumps distributors like VEMC or get in touch with your nearest Kirloskar pump authorised dealer.

Do’s and Don’ts of Rotary Pumps:

• Keep the suction lift at a minimum to support all the piping as well as hoses as needed.

Do’s ––

• Fill the tanks and pumps with water before operating the pump.

• During winter or freezing season, drain the pump of all water to avoid freezing and subsequent damage. Remove maximum water by rotating the pump end while draining.

Don’ts ––

• Never lift the pump with suction or discharge hoses still attached.

• Don’t run the engine at a faster or slower pace than recommended.

• Don’t stop or start the pump while in a high-speed or engaged state.

Ask your Kirloskar Pump Authorised dealer for more.

Do’s and Don’t of Multi-Stage Pumps

Do’s ––

• Allow the pump to cool down before you disconnect the hoses or drain it.

• Try and avoid air traps inside the suction and discharge lines. Design the suction line with a slight slope.

• Follow the maintenance schedule provided in the user manual.

Don’ts ––

• Don’t carry out any repair or maintenance work while the pump is still hot or running.

• Don’t operate the unit with the discharge lines obstructed or the valve closed.

• Don’t bye-pass or disconnect any gauges or safety switches.

Get in touch with your Kirloskar pump authorised dealer for more.

For more tips on pumping, contact VEMC now. Visit us at www.vemc.co.in, call us at 022 43436655, or email us at marketing@vemc.co.in. VEMC is one of the top Kirloskar pumps distributors and if you need help with, or are looking for Industrial Water Pumps in Mumbai, we are the right people to reach out to.

Be Monsoon Ready with Kirloskar’s Best-in-Class Dewatering Pumps

by vemcoblogs -

Water logging in cities and towns during monsoons is a common sight in India. This causes immense loss to businesses, transportation and the economy at large. In extreme cases, flood-like situations can be created in some parts of the city. To deal with these problems, Kirloskar pump distributors have some incredible dewatering pumps to offer. These are easy to use, compact, efficient and powerful enough for all your massive dewatering needs. Before you approach your nearest Kirloskar Water Pump dealer, however, read this blog to know everything about their dewatering pumps.

Role of Dewatering Pumps in Monsoons

A dewatering pump is simply a centrifugal pump used to remove logged water. The Kirloskar series of auto-prime dewatering pumps require no manual intervention and is easy to start up and operate with its quick plug-and-play features. These are high-capacity and can effectively deal with huge volumes of water. Due to their portability and mobility, these can be transported easily to the sites of water logging and used to drain excess water. Get in touch with your nearest Kirloskar water pump dealer for more information on dewatering and Industrial Water Pumps in Mumbai.

Types of Dewatering Pumps VEMC Offers:

A Kirloskar pump distributor will typically offer you four main types of dewatering pumps:

• Self-Priming Pumps ––

These pumps remove air and deal with air binding without any manual intervention.

• Auto-Prime Pumps ––

These are portable pumps that can be ported easily to any flooded area. These also require no manual intervention in priming and use the power from a prime mover (a petrol or diesel engine) that is attached to the pump.

• Eterna Pumps ––

These are submersible, heavy-duty dewatering pumps with robust construction, high efficiency and energy-saving design.

• Cutter Pumps ––

These pumps use a sharp tungsten carbide cutting blade to cut down solid and semi-solid waste while dewatering a flooded area. These are highly useful in areas with a higher likelihood of sewage.

Why Choose Kirloskar Dewatering Pumps?

As any Kirloskar water pump dealer will point out, Kirloskar dewatering pumps are hands down the best choice in the segment out there.

• For starters, these are some of the most powerful pumps available. They have a high sucking lift and can effectively pump huge volumes of water during monsoons.

• These pumps come in corrosion/abrasion-resistant bodies and can sustain prolonged submersion in water.

• With their automatic thermal overload protector, the engine is protected from overload and current error.

• The simple design of these pumps enables even the least trained personnel to handle and use these pumps. This can be critical during emergency flood situations.

• These pumps are highly futuristic in terms of energy efficiency and cost savings. They have sustainable designs and can be serviced even by the least skilled technicians.

• These are multi-purpose pumps and apart from dewatering during monsoons, they can also be used in gardening, irrigation, farming, lifting water to overhead tanks, etc.

Conclusion

For more information on dewatering pumps, get in touch with your nearest Kirloskar Pump Distributor. Alternatively, you can also speak to us at VEMC. We happen to be the leading KBL channel partner in dewatering pumps. Call us at 022 43436655 or email us at marketing@vemc.co.in

Pump Shaft And Belt Alignment: Problems And Solutions

by vemcoblogs -

Running your pumps day in and day out, especially in an industrial setting, will inevitably result in the misalignment of shaft and belt at one point. But these misalignments must be kept within tolerable limits to avoid causing serious damage at a later stage. As any Kirloskar pump distributor or Kirloskar Pump Authorized Dealer will tell you, pump shaft and belt alignment is one of the necessary interventions of maintenance.

In This Blog, We Will Take a Look On Pump Shaft And Belt Alignment Problems And Their Solutions:

What is Pump Alignment?

Power is transmitted from a motor to a pump through shafts or belts. However, due to rigorous work day in and day out, the shafts and belts can get misaligned. This could cause serious damage to seals, create lubrication issues and cause leakages. If the damage is serious, it could result in increased downtime, thus affecting your workflows. These issues are in fact quite common in Industrial Water Pumps.

Overall, pump misalignment could drastically reduce the efficiency of your pump, and cause serious wear and tear, and unforeseen breakdowns. In the worst-case scenario, the pump can suffer permanent damage, requiring an unplanned costly replacement. 

Early detection and correction of shaft and belt misalignment of the pump are therefore very important. As a leading Kirloskar Pump Authorised Dealer and Authorised Pump Original Equipment Manufacturer (APOEM), VEMC has unparalleled expertise in pump assembling & alignment.

Shaft Misalignment

Shaft misalignment accounts for nearly half of the breakdown costs of pumps. Shaft misalignment is of two types:

• Parallel misalignment –– which is of further two types: horizontal and vertical. Parallel horizontal misalignment is said to have taken place when the motor shaft moves horizontally away from the pump. Parallel vertical misalignment likewise happens when the motor shaft moves vertically away from the pump shaft.

• Angular misalignment –– is said to have happened when the motor and the pump shaft move away at an angle from the pump shaft, but both continue to be in the same horizontal or vertical plane. Angular misalignment could also be vertical or horizontal.

Types of belt misalignment

• Vertical or twisted misalignment –– takes place when one of the pulleys develops an angular error from the vertical angle plane. By simply lifting the feet of the pump (front or rear depending on the direction of the error), the angle error can be corrected.

• Horizontal angle misalignment –– is said to have happened when the driver and the driven unit are no longer parallel to one another. This can be corrected by moving the front and rear feet forward or backward.

• Parallel misalignment –– usually takes place when the motor is positioned incorrectly along its shaft axis. It can also be caused due to the incorrect positioning of the pulleys on their respective shafts.

Our Solution

VEMC is an APOEM (Authorized Pumpset Original Equipment Manufacturer) apart from being a leading Kirloskar pump distributor. With our APOEM pump testing facility, we can detect errors causing pump misalignments with utmost effectiveness. This can significantly reduce the chances of pump failures and unexpected downtime.

To get the best quality witness-tested pumps with proper alignment and assembly, call us at 022 43436655 or email us at marketing@vemc.co.in. As the leading Kirloskar Authorised Dealer and Kirloskar pump distributor, we pride ourselves on the highest standards of maintenance service.

Energy Saving and Efficient Water Pumps – The Need of the hour

by vemcoblogs -

Efficient Water Pumps

While energy-saving pumps may come off as a seriously hefty investment upfront, over a period of time you’ll realise that they help you save more. This is because of the incredible amount of efficiency these pumps bring to the table! They instantly reduce the electricity units consumed, thus helping cut costs, and in the longer run, making your business more efficient and sustainable. So it is a trade-off of sorts! As any Kirloskar Pump Authorised Dealer will tell you, a number of factors make energy-saving and efficient water pumps the need of the hour.

In This Blog Let’s Take a Look at Energy Saving and Efficient Water Pumps The Need of the hour

Increased Consumer Demand

With the rise of industrialisation and urbanisation, there is going to be an exponential rise in consumer demand for energy. This puts disproportionate pressure on our already scarce energy resources, especially in the developing world. The demand-supply imbalance can actually raise the costs of energy per unit drastically in the near future and will necessitate the installation of energy-saving and efficient water pumps for your domestic and business use. So before it’s too late, speak to Industrial Water Pump Suppliers in Mumbai and bag the best deals on these energy-efficient water pumps.

Environmental Friendly

Sustainable development has become the buzzword the world over and has left no sector untouched. When it comes to pumping, efficient water systems and pumps can drastically reduce energy use. Smart pumping technology and monitoring systems such as KirloSmart can actually help unearth patterns of usage and wastage to keep improving their operations. Kirloskar pump authorised dealers to have some of the best products to meet your sustainable pumping needs.

Reduced Downtime

The biggest benefit you get with efficient water systems and pumps is streamlined and smooth pumping. This will ensure you have minimum possible downtime as the wear and tear will be much less. With advanced data-based technology, you can also predict faults and disruptions, and actually, establish an effective regime for preventive maintenance. Reduced downtime means no more unforeseen emergency situations or loss of revenues and reputation. Get in touch with your nearest Kirloskar pump authorised dealer for more.

Lasts longer

The longer lifespan of efficient pumps is a tacit benefit that probably contributes the most in terms of operational value to your business. When your pumps and water systems last longer, you no longer have to worry about expending additional resources on replacements. Your costs of maintenance also go down significantly and in a competitive industry, this can add to your operational efficiency and competitive advantage over other players. These smart, new-age and efficient pumps are available with nearly all industrial pump suppliers in Mumbai today.

Conclusion

For more information on energy-saving and efficient water pumps, get in touch with us at 022 43436655 or email us at marketing@vemc.co.in. VEMC is one of the leading Industrial Water Pumps Dealers in Mumbai and has rich experience in dealing with pumps and water systems, as a top Kirloskar pump authorised dealer.

Advanced Benefits Of A Rotary Screw Air Compressor

by vemcoblogs -

Rotary screw compressors bring in a host of benefits to your business –– technical, economical and utilitarian. These are highly energy-efficient air compressors and also very adaptable, thanks to their variable speed control. An ELGi Screw Compressor is in fact significantly superior to any of the piston air compressors you can find out there. 

In This Blog, We Take You Through Some Of The Most Advanced Benefits You Get With A Rotary Screw Air Compressor:

 Rotary Screw Air Compressors Vs. Piston

With respect to the engine arrangements, a rotary screw compressor brings you wide diversity as compared to the piston compressor. Piston compressors simply use pistons to pressurise air and move it from one cylinder to another, compressing it in the process.

Rotary screw air compressors like ELGi Screw Compressor bring the best technology to the table. This completely eliminates the friction when the engine spins and makes downtime almost non-existent.

That said, the initial investment is somewhat on the higher side. However, the benefits that rotary screw air compressors bring along quickly cover these initial one-time costs.

 Choosing The Right Motor And Compressor Size

Direct-drive compressors are usually more efficient than belt-drive and gear-drive compressors. But again, it depends on your budget. When it comes to sizing your compressor, choose on the basis of the air pressure you would require throughout the day. If you’re unable to decide the type and size of your compressor, you can always get in touch with VEMC –– a leading air compressor dealer in Mumbai.

Technology And Equipment Considerations

With rotary screw compressors, maintenance is incredibly simple. ELGi Screw Compressor offers single-service door access to routine maintenance points. They also have spin-on oil filters and separator elements for quick and easy routine service. 

When To Replace And Upgrade

You may be hesitant about replacing your existing air compressor with a rotary screw air compressor,  especially if it is in a good condition. But as a thumb rule, you must look to replace your equipment after 10 years or so. This is to be abreast of all the innovations and efficiencies brought about by advancing technology. Often running older equipment can be more expensive than using new ones due to innate inefficiencies or wear and tear. 

Environmental Impact

ELGi Screw Compressors are specially designed to reduce running costs and environmental impact. Variable Speed Drives (VSD) for one reduce energy loss significantly. With IoT-based applications, compressors can be connected to their owners through a mobile app, thus ensuring monitoring and predictive maintenance. Overall, ELGi as an organization is committed to addressing climate change and building a long-term sustainability roadmap.

Conclusion 

EGLi Screw Compressor is clearly a winner when it comes to offering efficiency, savings, and sustainability. For more details on its features, applications, use and maintenance, please call VEMC at 022 43436655 or email us at marketing@vemc.co.in. We are a leading Compressor Dealer in Mumbai with 72 years of rich experience and cutting-edge expertise at our back.

What Size of Industrial Air Compressor do I Need?

by vemcoblogs -

One of the most challenging decisions while buying an air compressor is sizing it. This is necessary for maximum efficiency and involves a number of parameters such as CFM, pressure, application, layout, etc. While sizing an air compressor may seem simple on the surface, it is determined by a host of factors to ensure optimum performance. As we are one of the leading Air Compressor Dealers in Mumbai.

In This Article, We Can Take You Through All Of These That Shape The Sizing Decision Of Your Industrial Air Compressor:

Size of your project

Quite simply, bigger the size, more will be the power generated. Whether you need your air compressor for heavy-duty construction work or office work will be the primary determinant of your sizing decision. Besides, if you need a constant flow, it will be better to invest in a large-sized air compressor as small compressors are not able to generate it.

Your tools and applications

Next, you’ll have to consider the work you’re going to perform with your air compressor. Air compressors have wide-ranging applications from drilling to sand-blasting. Choosing the right size for the right task is critical to ensure effectiveness. All tools have a required flow or CFM which should be matched with that generated by your air compressor. An ELGi Reciprocating Compressor is a great option for both light and heavy-duty use.

Your source of power

A standard domestic voltage should be enough for most compressors to work. But for larger industrial compressors, a 240-volt source is necessary. Where electricity isn’t available, compressors can also be powered with petrol. Since your source of power acts as an important constraint in the functioning of your compressor, take it into serious consideration before choosing one.

Space available

If you’re trying to buy an air compressor for your garage startup, there’s very little hope that a large industrial compressor will fit in there. Given the paucity of space in the city, most air compressor dealers in Mumbai will emphasize on the space constraint as the number one factor to size your compressor. Besides, if you’re going to move the compressor frequently, a smaller and lighter one will always be the better choice to avoid inflating your carriage and labour bills.

Size of the tank

The size of the tank is the most important factor that decides the size of an air compressor. This is significant because it determines how long you use the compressor before it needs to refill the air tank. If your tools and applications require a constant flow, a bigger air compressor is the right choice. Smaller tools like nail gun require short bursts of compressed air that don’t need a large tank. But the motor will have to switch on and off, which can cause wear and tear, and affect the lifespan of your compressor overall.

Conclusion 

Our expertise and experience make us one of the topmost air compressor dealers in Mumbai. If you’re specially looking for ELGi Air Compressor Dealers in Mumbai, we are the perfect choice for you. Dial us at 022 43436655 or email us at marketing@vemc.co.in to get in touch today!