Factors affecting the efficiency of a centrifugal pump

As you must know that every part of the puzzle needs a specific shape and type of a jigsaw piece- something that applies to the Oil and Gas industry when it comes to choosing the right category of pumps to mix and handle oilfield fluids. It is the centrifugal pumps, aided by the rotary motion of the centrifugal motor, that create enough centrifugal force in the pumps to discharge the fluids.

The industry uses different types of centrifugal pumps in many applications like, electric submersible pumps is used as a water and oil separator. It acts as water pumps to re-inject hundreds of gallons of water or low viscosity liquids in a short period into a reservoir- all done without lifting it to the ground surface.

But there are factors that ensure that these pumps manage to pull off their Herculean tasks with efficiency:

  • The level of viscosity in the fluid as low viscosity fluids are best suited for centrifugal pumps as the mechanics involved lead to high liquid shear.
  • The amount of work the pump has to do is directly proportional to the specific density and the gravity of the fluid coursing through it. For example, if it is oil, then the inner power required to pump it is exponentially more. 
  • The level of temperature and pressure are also key factors as fluctuations in both cases can only be countered by special gasketing, casing penetrations, seals, and mounting designs.
  • Vapour pressure, i.e., the pressure at  which a fluid will transition into vapor state as it will help in avoiding cavitation and bearing damage caused by dry running.

Hailed as the best pump dealers in Mumbai, Vijay Engineering and Machinery Company is regarded as one of the reputed pump dealers in India and the trustworthy distributors of the reliable Kirloskar pumps. From being regarded as the best pump dealers in Navi Mumbai to to being the trusted pump dealers in Vashi assisting industries for decades, VEMC lives by its principle to never compromise on delivering excellence. Check out our website for more!

Useful Ideas Before Choosing The Best Quality Industrial Water Pumps

An industrial water pump can be defined as a hydraulic machine that is used to increase the overall mechanical energy of the fluid which is water. In industries, pumps play a crucial role in moving hot and cold water from one place to another in a compact system. The speciality of the Kirloskar Submersible Pumps is that they transfer fluids or slurries which flow through seamlessly from the region of higher concentration to the region of lower concentration. Over the years, the water pumps are not only found common in the industries but also found very useful in the household, colleges, commercial complexes, hospitals, schools, etc. The industrial pumps are not only for the water supply but also for the gasoline supply, marine service, chemical movement, flood control, etc. The submersible pump dealers in Mumbai found in rural as well as urban areas. In spite of such wide usage, people get stuck in choosing the best water pumps for their intended purpose. So, here are a few useful ideas to consider before choosing one for your use.

Flow rate: The flow rate generally determines the effectiveness of the water pump. The flow rate can be defined as the time at which the pump takes to pump out a certain amount of water. This is mostly measured in litres per minute. If you are going to choose the pumps for the industry purpose or farm sites, you should select the one that has 2500 litres per minute flow rate. On the other hand, for any household work, the pumps that have a flow rate between 100-200 litres per minute will be ideal. 

The size of the inlet: The inlet size of most of the pumps can be 1 to 6 inches but in some cases, it can even more. Centrifugal pumps bought from the Pump Manufacturers in Mumbai work in such a way that it sucks water from the inlet and discharges it through the outlet valve. In that case, the bigger the size of the inlet, the more amount of water it can pump out and faster you will be able to complete the job. 

Maximum head and pressure: When the water pump has the maximum head, it refers to the longest distance in terms of the height that the pump will be able to pump water. For example, if you buy a pump with a maximum of 50 meters, if you try to suck water to levels higher than that then the flow rate will be zero. You must also choose the pump which has a maximum head higher than the height you intend to pump the water. 

The quality of the pump: The first thing to consider when you wish to buy an industrial pump is the brand of the water pump. The motor or the engine of the pump will tell you about the quality of the pump. You must pay attention to gather information about how it works and how long it works with the people who already use it. Conduct mandatory researches over the internet and know how the quality of the pump should be.

Thus, you have to consider the above-mentioned points when choosing the best industrial pumps. You can find different Pump manufacturers in Pune from where you can choose the best one that suits your purpose.