Tag: Kirloskar water pumps

Kirloskar Dewatering Pumpsets – Solution to Water Clogging

by vemcoblogs -
Kirloskar Water Pumps

Dewatering pumps are centrifugal pumps used to remove water from a site. As your Kirloskar Submersible Pump Dealer will tell you, you can use these pumps in a number of operations and sites such as construction, drainage, tunnels, mines and buildings. Which type of dewatering pump you will need depends entirely on the medium you are trying to relocate. For instance, water along with abrasives is best removed by a drainage pump fitted with a strainer. Likewise, water with solids is best removed by dewatering sludge pumps. This blog takes you through the overview, types, features and installation of Kirloskar water pumps.

Types of Kirloskar Dewatering Pumpsets:

You will find two types of dewatering pumps with your Kirloskar submersible pump dealer: M type and G type:

  • M type: These Kirloskar water pumps are single-stage pumps with an impeller mounted on the motor shaft. These are lightweight and made of aluminum with corrosion-resistant stainless steel wet ends. M-type pumps are compact and portable and are mostly used in borewells or tubewells.

  • G type: These Kirloskar water pumps come with built-in automatic on/off thermal switches which protect the motor from voltage fluctuations. These pumps can also be equipped with motion sensors for automatic start and shutdown. G-type Kirloskar water pumps find application in tunnels, shipyards, mines, fire fighting purposes, etc. 

Features and Benefits of Kirloskar Dewatering Pumpsets:

  • Compact and portable
  • Durable due to corrosion/resistant material like stainless steel
  • High efficiency throughout the pump lifespan
  • Optimum seal life
  • Compatible with motion sensors

Installation and Commissioning

Your Kirloskar Submersible Pump Dealer will typically give you certain directions on the installation and commissioning of your pump set, but here are some of the most important ones you need to be mindful of:

  • Personnel involved in the installation and operation of Kirloskar water pumps must be well-trained and qualified to carry out the work.
  • When lifting the pump set, use lifting equipment suitable for the weight of the pump.
  • Connect the earth stud to avoid hazards from randomly induced currents.
  • Ensure the pump is properly filled and doesn’t run dry for over 5 minutes continuously.
  • Only use your Kirloskar water pump for the specified liquids as the corrosion resistance may vary from one medium to another.
  • Check for any leaks in seals or gaskets and keep the pump well-maintained.
  • Monitor all auxiliary components continuously to ensure they function correctly.

Overview of Kirloskar Dewatering Pumpsets

Both M-type and G-type pumps are highly efficient and effective in dewatering a range of sites. With some additions, these pumps can do even better. For instance, field adjustable nitrile rubber lines diffuser can optimise efficiency throughout the life of the pumps. Likewise, with sacrificial Zinc anodes, the pump can also be used in a saline fluid environment. On special requests, the pumps can be supplied in a complete stainless steel encasing.
VEMC is a leading Kirloskar submersible pump dealer. To book a Kirloskar Water Pump for domestic or business use, give us a call on 022 43436655 or email us at marketing@vemc.co.in.

Types and Specifications of Different Water Pumps

by vemcoblogs -

As water pump dealers would tell you, the water pumps are used in construction sites. People use them for dewatering. This is a process whereby extra water that may have accumulated on the site is removed from over there. There are so many reasons why water can build up in these sites. It could be because of heavy rains. At times, the water table could be high as well. The pumps let you move the water within a short period. This helps in reducing the downtime as well. There are two main types of such pumps. 

The types of water pumps

As water pumps distributors would tell you, there are two major variations of water pumps. These are positive displacement pumps and centrifugal pumps. Both these kinds of pumps are designed in such a way that you can move water to another place from where it is continuously. A centrifugal water pump makes use of a rotating impeller so that it can move the water within the pump. This also allows it to force the discharge flow. A positive displacement water pump delivers a specified amount of flow by way of mechanical shrinking and expansion of a diaphragm that is flexible.

water pumps distributors

Things to keep in mind for centrifugal water pumps

The centrifugal industrial water pumps are used in a wide range of water system and construction applications. They can do a lot more than mere dewatering. They can be used to pump water supplies of buildings. They can also work with pneumatic systems as well as ones where you do not need to use the suction lift. They are also used for pumping water from domestic wells. They can increase pressure in water intake lines as well. They can provide an uninterrupted pressure source used in the fire protection systems too.

Things to keep in mind for positive displacement water pumps 

The positive displacement of Kirloskar water pumps is also referred to as rotary pumps. They are effective. This is because they can remove air from the lines, and this does away with the need to bleed the air as such. They are also extremely handy when it comes to dealing with liquids that have a high amount of viscosity. The main issue with these pumps is that they need a really small clearance between the outer edge of a rotating pump and the pump itself.       

Features and specifications of these pumpsAs you would get to know from your water pump dealers, there are several important factors that you must take into consideration at the time of selecting such a pump. In power, you must look at the horsepower and the flow rate. In the material, you must check if it has been built with weather-resistant materials that are useful when it comes to applications where the pump could be exposed to the natural elements. You also need to check the fuel and the motor type over here, and the total head discharge.