Get Monsoon Ready with Dewatering Pumps

How to drive through flooded roads

Rain during monsoon can be a cause of concern for your facility as it brings along problems related to waterlogging, often disrupting production and causing unnecessary delays. Bouts of heavy rainfall can flood the whole facility in a matter of hours, requiring an urgent and powerful flush-out mechanism. Dewatering pumps are a one-time investment that can tackle this problem with absolute ease and efficiency.

The emergency-oriented nature of this product requires that you give priority to quality over cost. Relatively cheap dewatering pumps may be lighter on your pocket in the short term but can have a number of hefty and hidden costs. Cheap and low-quality pumps may break down or malfunction frequently, adding to repair and maintenance bills. Also, these may not be effective enough to flush out huge volumes of water in case of sudden rains or storms, bringing your facility to a standstill and causing excessive loss of business. 

VEMC installs and recommends only the most reliable and high-performing Dewatering Pumps that fall under these categories:

Submersible Pump

Kirloskar make Submersible pumps

Submersible Pumps are not just powerful but are designed with robust anti-corrosive material for increased durability. These can even flush out raw sewage with the maximum permissible solid size of up to 300 mm. Features that enhance their performance and control maintenance costs are:

  • Dry type submersible motor cooled by the liquid being handled 
  • Maintenance free grease-lubricated bearings sealed for life
  • Air-tested motor for leak-free operation
  • Liquid level controllers to avoid dry running

Self-Priming Water Pump

Kirloskar Make Self Priming Pumps

A self-priming water pump is designed to automatically trap water inside, before it starts pumping. Water inside the pump prevents the formation of air pockets which may impair proper operation. The following features make our Self-Priming Pumps of great utility:

  • No need of foot valve and priming the pump set every single time 
  • Non-clog impeller that handles solids up to 60 mm in size
  • Minimum vibrations prevent damage 
  • Consistent performance by maintaining concentricity
  • Easy maintenance and good interchangeability of components to enable servicing even at remote locations by semi-skilled technicians

Check out the Gen-next version of Self Priming here

Cutter Pump

Kirloskar Make Cutter Pumps

These are specially designed to grind soft solids into small pieces to be separately drawn away through pipes. These find use in discharging municipal waste, industrial effluents and domestic sewage. Here are some features that make our Cutter Pumps stand out in the market:

  • Easily serviceable and suitable for both temporary and permanent installation
  • Can either be installed on auto coupling system or can stand freely at the bottom of a pit
  • Water-tight cable plug connection to ensure no entry of liquid into the motor
  • Stainless steel clamp for easy and quick dismantling of pump casing without the use of any special tool 

For further information on industrial pumps, motors, and other equipment, feel free to contact us on +919819907445. We would be happy to assist you in finding the best match based on your requirements. Established in 1948, VEMC is ISO 9001:2015 certified and a pioneer in the field of electromechanical engineering products, allied equipment, and services. VEMC has also been an authorised dealer of Kirloskar Pumps since 1948. Send your inquiries on marketing@vemc.co.in