Logo

Water Supply

BHR/ BHQ/ BHM/ BHMa/ BHA


BHR BHQ BHM BHK img

Description:
Overview:
Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features:  Vibration-free performance Low submergence No priming required Dry pit/Wet pit arrangement available Direct drive/Right angle gear drive Impeller pull-out/Non-pull-out Bowl pull-out/Non-pull-out Gland packed / Mechanical seal 50Hz / 60Hz availability

Applications:  Water supply Pumps Irrigation Pumps Cooling tower Thermal and Nuclear power plants Steel, Cement industries Refineries Sea water on off-shore platforms Condensate extraction Fire fighting Pumps Flood control Dry Docks

Specification: Delivery size up to 2200 mm Capacity up to 40,000 m3 /hr Head up to 200 m

SCT Extended


sct ext

Description:
Overview:
These are horizontally axially split casing, single stage, double suction or single suction pumps with horizontal shaft and detachable stuffing box called insert with horizontal axially split volute type. The impeller is accurately balanced by double or single suction. These pumps are used in handling water with slight impurities, petroleum refineries, conditioning and refrigeration system and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water/Liquids with slight impurities Petroleum refineries Air-conditioning and refrigeration systems Fire protection systems and mining Pump axis horizontal or vertical

Specification: Delivery size up to 350 mm Capacity up to 4500 m3 /hr Head up to 330 m Temperature (-) 10 ?C to 100 ?C

DSM


split dsm dsmt

Description:
Overview:
These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting

Specification: Delivery size up to 150 mm Capacity up to 470 m3 /hr Head up to 180 m Temperature (-) 10 ?C to 90 ?C
Downloads:DSM PDF

DSMT


split dsm dsmt

Description:
Overview:
These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting

Specification: Delivery size up to 150 mm Capacity up to 470 m3 /hr Head up to 180 m Temperature (-) 10 ?C to 90 ?C
Downloads:DSMT PDF

UP / UPL / UPH / UP (T)


split up upl uph

Description:
Overview:
These pumps are gland packed and have mechanical seal. These are mainly used in water supply, irrigation, power plants and can have delivery size up to 1100 mm.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water Supply Irrigation Air-conditioning Power plants Paper, Sugar, Textile mills Fire fighting

Specification: Delivery size up to 1100 mm Capacity up to 20,000 m? /hr Head up to 160 m Temperature (-) 10 ?C to 90 ?C

BHR/ BHQ/ BHM/ BHMa/ BHA


BHR BHQ BHM BHK img

Description:
Overview:
Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features:  Vibration-free performance Low submergence No priming required Dry pit/Wet pit arrangement available Direct drive/Right angle gear drive Impeller pull-out/Non-pull-out Bowl pull-out/Non-pull-out Gland packed / Mechanical seal 50Hz / 60Hz availability

Applications:  Water supply Pumps Irrigation Pumps Cooling tower Thermal and Nuclear power plants Steel, Cement industries Refineries Sea water on off-shore platforms Condensate extraction Fire fighting Pumps Flood control Dry Docks

Specification: Delivery size up to 2200 mm Capacity up to 40,000 m3 /hr Head up to 200 m

SCT Extended


sct ext

Description:
Overview:
These are horizontally axially split casing, single stage, double suction or single suction pumps with horizontal shaft and detachable stuffing box called insert with horizontal axially split volute type. The impeller is accurately balanced by double or single suction. These pumps are used in handling water with slight impurities, petroleum refineries, conditioning and refrigeration system and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water/Liquids with slight impurities Petroleum refineries Air-conditioning and refrigeration systems Fire protection systems and mining Pump axis horizontal or vertical

Specification: Delivery size up to 350 mm Capacity up to 4500 m3 /hr Head up to 330 m Temperature (-) 10 ?C to 100 ?C

DSM


split dsm dsmt

Description:
Overview:
These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting

Specification: Delivery size up to 150 mm Capacity up to 470 m3 /hr Head up to 180 m Temperature (-) 10 ?C to 90 ?C
Downloads:DSM PDF

DSMT


split dsm dsmt

Description:
Overview:
These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting

Specification: Delivery size up to 150 mm Capacity up to 470 m3 /hr Head up to 180 m Temperature (-) 10 ?C to 90 ?C
Downloads:DSMT PDF

UP / UPL / UPH / UP (T)


split up upl uph

Description:
Overview:
These pumps are gland packed and have mechanical seal. These are mainly used in water supply, irrigation, power plants and can have delivery size up to 1100 mm.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water Supply Irrigation Air-conditioning Power plants Paper, Sugar, Textile mills Fire fighting

Specification: Delivery size up to 1100 mm Capacity up to 20,000 m? /hr Head up to 160 m Temperature (-) 10 ?C to 90 ?C

BHR/ BHQ/ BHM/ BHMa/ BHA


BHR BHQ BHM BHK img

Description:
Overview:
Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features:  Vibration-free performance Low submergence No priming required Dry pit/Wet pit arrangement available Direct drive/Right angle gear drive Impeller pull-out/Non-pull-out Bowl pull-out/Non-pull-out Gland packed / Mechanical seal 50Hz / 60Hz availability

Applications:  Water supply Pumps Irrigation Pumps Cooling tower Thermal and Nuclear power plants Steel, Cement industries Refineries Sea water on off-shore platforms Condensate extraction Fire fighting Pumps Flood control Dry Docks

Specification: Delivery size up to 2200 mm Capacity up to 40,000 m3 /hr Head up to 200 m

RKB


rkb

Description:
Overview:
RKB is a multistage centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors.

Features:  Gland Packed / Mechanical Seal 50 Hz / 60 Hz availability

Applications:  Fire-fighting Booster Service Mine Dewatering Boiler feed

Specification: Delivery size up to 250 mm Capacity up to 850 m3 /hr Heads up to 850 m Temperature (-) 40 ?C to 140 ?C
Downloads:RKB PDF

MN


mla

Description:
Overview:
These are single suction, horizontal shaft, high pressure multistage pumps, consisting of ring section diffuser casings bolted between suction and delivery casing with enclosed type impeller. These are ideal for sprinkler irrigation, fire-fighting, water supply in high rise buildings and so on.

Features:  Gland packed / Mechanical seal 50Hz / 60 Hz availability

Applications:  Irrigation Fire-fighting Booster Service Mine Dewatering

Specification: Delivery size up to 300 mm Capacity up to 1000 m3 /hr Head up to 750 m Temperature (-) 10 ?C to 140 ?C
Downloads:MN PDF

MLA


mla

Description:
Overview:
These are single suction, horizontal shaft, high pressure multistage pumps, consisting of ring section diffuser casings bolted between suction and delivery casing with enclosed type impeller. These are ideal for sprinkler irrigation, fire-fighting, water supply in high rise buildings and so on.

Features:  Gland packed / Mechanical seal 50Hz / 60 Hz availability

Applications:  Irrigation Fire-fighting Booster Service Mine Dewatering

Specification: Delivery size up to 300 mm Capacity up to 1000 m3 /hr Head up to 750 m Temperature (-) 10 ?C to 140 ?C
Downloads:MLA PDF

CF


cf

Description:
Overview:
These pumps are of multistage and have a modular construction. These are either gland packed or mechanically sealed and can be of either electrical drive or engine drive. These are widely used in air conditioning, boiler feed, petroleum, chemical and process industries and so on.

Features:  Conforming to DIN 24254 Flanges to DIN 2501 PN 40 Channel Multistage, Modular Construction Self priming Gland Packed / Mechanical Seal Electrical Drive / Engine Drive

Applications:  Petroleum, Chemical and Process Industry Air Conditioning Boiler Feed Domestic Ship/Naval Engineering Liquid with Gas mixture

Specification: Delivery size up to 50 mm Capacity up to 20 m3 /hr Head up to 315 m Temperature (-) 40 ?C to 120 ?C
Downloads:CF PDF

BHR/ BHQ/ BHM/ BHMa/ BHA


BHR BHQ BHM BHK img

Description:
Overview:
Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features:  Vibration-free performance Low submergence No priming required Dry pit/Wet pit arrangement available Direct drive/Right angle gear drive Impeller pull-out/Non-pull-out Bowl pull-out/Non-pull-out Gland packed / Mechanical seal 50Hz / 60Hz availability

Applications:  Water supply Pumps Irrigation Pumps Cooling tower Thermal and Nuclear power plants Steel, Cement industries Refineries Sea water on off-shore platforms Condensate extraction Fire fighting Pumps Flood control Dry Docks

Specification: Delivery size up to 2200 mm Capacity up to 40,000 m3 /hr Head up to 200 m

SCT Extended


sct ext

Description:
Overview:
These are horizontally axially split casing, single stage, double suction or single suction pumps with horizontal shaft and detachable stuffing box called insert with horizontal axially split volute type. The impeller is accurately balanced by double or single suction. These pumps are used in handling water with slight impurities, petroleum refineries, conditioning and refrigeration system and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water/Liquids with slight impurities Petroleum refineries Air-conditioning and refrigeration systems Fire protection systems and mining Pump axis horizontal or vertical

Specification: Delivery size up to 350 mm Capacity up to 4500 m3 /hr Head up to 330 m Temperature (-) 10 ?C to 100 ?C

DSM


split dsm dsmt

Description:
Overview:
These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting

Specification: Delivery size up to 150 mm Capacity up to 470 m3 /hr Head up to 180 m Temperature (-) 10 ?C to 90 ?C
Downloads:DSM PDF

DSMT


split dsm dsmt

Description:
Overview:
These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting

Specification: Delivery size up to 150 mm Capacity up to 470 m3 /hr Head up to 180 m Temperature (-) 10 ?C to 90 ?C
Downloads:DSMT PDF

UP / UPL / UPH / UP (T)


split up upl uph

Description:
Overview:
These pumps are gland packed and have mechanical seal. These are mainly used in water supply, irrigation, power plants and can have delivery size up to 1100 mm.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water Supply Irrigation Air-conditioning Power plants Paper, Sugar, Textile mills Fire fighting

Specification: Delivery size up to 1100 mm Capacity up to 20,000 m? /hr Head up to 160 m Temperature (-) 10 ?C to 90 ?C

RKB


rkb

Description:
Overview:
RKB is a multistage centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors.

Features:  Gland Packed / Mechanical Seal 50 Hz / 60 Hz availability

Applications:  Fire-fighting Booster Service Mine Dewatering Boiler feed

Specification: Delivery size up to 250 mm Capacity up to 850 m3 /hr Heads up to 850 m Temperature (-) 40 ?C to 140 ?C
Downloads:RKB PDF

MN


mla

Description:
Overview:
These are single suction, horizontal shaft, high pressure multistage pumps, consisting of ring section diffuser casings bolted between suction and delivery casing with enclosed type impeller. These are ideal for sprinkler irrigation, fire-fighting, water supply in high rise buildings and so on.

Features:  Gland packed / Mechanical seal 50Hz / 60 Hz availability

Applications:  Irrigation Fire-fighting Booster Service Mine Dewatering

Specification: Delivery size up to 300 mm Capacity up to 1000 m3 /hr Head up to 750 m Temperature (-) 10 ?C to 140 ?C
Downloads:MN PDF

MLA


mla

Description:
Overview:
These are single suction, horizontal shaft, high pressure multistage pumps, consisting of ring section diffuser casings bolted between suction and delivery casing with enclosed type impeller. These are ideal for sprinkler irrigation, fire-fighting, water supply in high rise buildings and so on.

Features:  Gland packed / Mechanical seal 50Hz / 60 Hz availability

Applications:  Irrigation Fire-fighting Booster Service Mine Dewatering

Specification: Delivery size up to 300 mm Capacity up to 1000 m3 /hr Head up to 750 m Temperature (-) 10 ?C to 140 ?C
Downloads:MLA PDF

CF


cf

Description:
Overview:
These pumps are of multistage and have a modular construction. These are either gland packed or mechanically sealed and can be of either electrical drive or engine drive. These are widely used in air conditioning, boiler feed, petroleum, chemical and process industries and so on.

Features:  Conforming to DIN 24254 Flanges to DIN 2501 PN 40 Channel Multistage, Modular Construction Self priming Gland Packed / Mechanical Seal Electrical Drive / Engine Drive

Applications:  Petroleum, Chemical and Process Industry Air Conditioning Boiler Feed Domestic Ship/Naval Engineering Liquid with Gas mixture

Specification: Delivery size up to 50 mm Capacity up to 20 m3 /hr Head up to 315 m Temperature (-) 40 ?C to 120 ?C
Downloads:CF PDF

DB


db

Description:
Overview:
With a back pull out design these pumps are gland packed or mechanically sealed and are used for air conditioning, booster service, fire fighting and sprinkler system. Delivery size varies from 32 mm to 150 mm.

Features:  Conforming to DIN 24255 Back pull-out design Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Air Conditioning Sprinkler systems Fire fighting Booster service

Specification: Delivery size up to 150 mm Capacity up to 550 m? /hr Head up to 100 m Temperature (-) 10 ?C to 100 ?C
Downloads:DB PDF

CE


ce

Description:
Overview:
These pumps are of single stage with back pull out type suitable for 3500 rpm. These are either gland packed or mechanically sealed and delivery size can be up to 125 mm. These are very useful in air conditioning, water supply, fire-fighting and booster services.

Features:  Confirming to DIN 24256 and ISO 2858 Single stage with back pull-out type design Suitable for 3500 rpm Gland Packed / Mechanical Seal

Applications:  Air conditioning Fire fighting Booster services Water supply Sprinkler system Handling clear and turbid water up to 3000 ppm

Specification: Delivery size up to 125 mm Capacity up to 660 m? /hr Head up to 100 m Temperature up to (-) 10 ?C to 140 ?C
Downloads:CE PDF

CPHM


cphm

Description:
Overview:
These pumps can be driven by electric motor or engine. The impellers are of enclosed type and are balanced statically and dynamically. The casing has axial suction and top centre line delivery. Smooth hydraulic passages ensure high efficiency.

Features:  Conforming to DIN 24256, ISO 2858 Back pull-out design Gland Packed / Mechanical Seal 50 Hz / 60 Hz availability

Applications:  Booster Service Fire fighting Air-conditioning

Specification: Delivery size up to 200 mm Capacity up to 750 m3 /hr Head up to 150 m Temperature (-) 30 ?C to 90 ?C
Downloads:CPHM PDF

KU3 WINNER


KU3

Description:
Overview:
These pumps are very light weight and compact in size. These pumps have higher efficiency and thus results in lower cost. These can be installed horizontally and can be installed with HDPE/UPVC/GI pipes. These are deigned to withstand voltage fluctuations from 280-430 volts. These are widely used in sprinkler and drip water irrigation system, farm houses, nurseries and gardening.

Features:  Pump bearings are water lubricated Suitable for high voltage fluctuation Wet type submersible motor Water ? cooled and water lubricated

Specification: Suitable for borewells diameter 100 mm and more Capacity up to 19 m3 /hr Head up to 249 m Power rating 0.37 kW to 4.0 kW (1 hp to 5 hp)
Downloads:KU3 WINNER PDF

KU4 WINNER


ku4_winner_img

Description:
Overview:
These pumps are very light weight and compact in size. These pumps have higher efficiency and thus results in lower cost. These can be installed horizontally and can be installed with HDPE/UPVC/GI pipes. These are deigned to withstand voltage fluctuations from 280-430 volts. These are widely used in sprinkler and drip water irrigation system, farm houses, nurseries and gardening.

Features:  Pump bearings are water lubricated Suitable for high voltage fluctuation Wet type submersible motor Water ? cooled and water lubricated

Specification: Suitable for borewells diameter 100 mm and more Capacity up to 19 m3 /hr Head up to 249 m Power rating 0.37 kW to 4.0 kW (1 hp to 5 hp)
Downloads:KU4 WINNER PDF

KS 6


ks 6 7 8

Description:
Overview:
One of the best advantages of these pumps is huge saving in electrical consumption. These are designed to withstand wide voltage fluctuations. Non overloading power characteristics protect the motor. These pumps have dynamically rotating parts. Nitril rubber bushes ensure long life of pump even in muddy water. These are mainly used in fire fighting application. These also find wide usage in continuous supply of water in farming.

Features:  Huge savings in electrical consumption Capability to withstand wide voltage fluctuations Operates equally well with Genset, great help during power cuts Non-overloading power characteristics protect the motor Water lubricated bearings for years of service Design of non-returnable valve reduces friction Minimum possible diameters for easier setting into the borewell Dynamically balanced rotating parts Nitril rubber bushes ensure long life of pump even in muddy water CED coating cast iron components long life & rust free

Specification: Capacity 2400 to 60 lpm Head 5 to 306 m Power Rating 2.2 to 33 kW (3 to 45 HP)
Downloads:KS 6 PDF

KS 7


ks 6 7 8

Description:
Overview:
One of the best advantages of these pumps is huge saving in electrical consumption. These are designed to withstand wide voltage fluctuations. Non overloading power characteristics protect the motor. These pumps have dynamically rotating parts. Nitril rubber bushes ensure long life of pump even in muddy water. These are mainly used in fire fighting application. These also find wide usage in continuous supply of water in farming.

Features:  Huge savings in electrical consumption Capability to withstand wide voltage fluctuations Operates equally well with Genset, great help during power cuts Non-overloading power characteristics protect the motor Water lubricated bearings for years of service Design of non-returnable valve reduces friction Minimum possible diameters for easier setting into the borewell Dynamically balanced rotating parts Nitril rubber bushes ensure long life of pump even in muddy water CED coating cast iron components long life & rust free

Specification: Capacity 2400 to 60 lpm Head 5 to 306 m Power Rating 2.2 to 33 kW (3 to 45 HP)
Downloads:KS 7 PDF

KS 8


ks 6 7 8

Description:
Overview:
One of the best advantages of these pumps is huge saving in electrical consumption. These are designed to withstand wide voltage fluctuations. Non overloading power characteristics protect the motor. These pumps have dynamically rotating parts. Nitril rubber bushes ensure long life of pump even in muddy water. These are mainly used in fire fighting application. These also find wide usage in continuous supply of water in farming.

Features:  Huge savings in electrical consumption Capability to withstand wide voltage fluctuations Operates equally well with Genset, great help during power cuts Non-overloading power characteristics protect the motor Water lubricated bearings for years of service Design of non-returnable valve reduces friction Minimum possible diameters for easier setting into the borewell Dynamically balanced rotating parts Nitril rubber bushes ensure long life of pump even in muddy water CED coating cast iron components long life & rust free

Specification: Capacity 2400 to 60 lpm Head 5 to 306 m Power Rating 2.2 to 33 kW (3 to 45 HP)
Downloads:KS 8 PDF

KOS


submersible pumps kos

Description:
Overview:
Kirloskar KOS pump is an openwell submersible pump in cast iron construction. It has wide applications in agriculture and domestic segment.

Features:  Pump bearings are water lubricated Wet type submersible motor Water-cooled and water lubricated

Applications:  Agriculture Irrigation Sprinkler irrigation Water supply

Specification: Delivery size up to 100 mm (4) Capacity up to 110 m3 /hr Head up to 64 m Power rating 2.2 kW to 7.5 kW (3 hp to 10 hp)
Downloads:KOS PDF

KOS-M


submersible pumps kosm

Description:
Overview:
These pumps are designed for underwater applications and hence no need of priming and foot valve. These are easy to install and can withstand voltage variation from 350-440 volts. These are designed to prevent overloading and motor burning. These pumps find great use in submerged pumps in fountains, wells, sumps, and water links, water supply for domestic use in high rise apartments and in industries for clear water handling. Designed for underwater applications with CED coated wetted components for long life and rust free operation.

Features:  Designed for underwater applications: no need for priming and foot valve Easy installation - foundation and installation platform not required Can withstand wide voltage fluctuations from 160 to 260 Volts Non overloading power characteristics: no fear of motor burning out Dynamically balanced rotating parts ensure minimum vibrations Replaceable wear and tear parts and hence longer life Easy maintenance and spares availability: needs only one spanner for maintenance CED coated wetted components for long life and rust free operations More hygienic operations for drinking water

Applications:  Water supply for fountains, sumps and water tanks Water supply for use in apartments, buildings and hotels Gardening and small farm irrigation

Specification: Technical Specifications Head : 8 to 38 metres Capacity : 11 to 0.4 LPS Power Ratings : 0.37 to 1.5 kW (0.5 to 2.0 HP) Voltage Range : 160 to 260 V Material of Construction (Standard Supply) Impeller : Cast Iron Delivery Casing : Cast Iron Motor Body : Cast Iron Shaft : Stainless Steel
Downloads:KOS-M PDF

SHM


shm shs

Description:
Overview:
SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features:  Solid size up to 105 mm Back pull-out design Gland packed / Mechanical Seal 50 Hz / 60 Hz availability Also available in vertical execution

Applications:  Sludge Sewage Power material slurries Sugar factory waste

Specification: Delivery size up to 200 mm Capacity up to 800 m?/hr Head up to 90 m Temperature (-) 10 ?C to 140 ?C
Downloads:SHM PDF

SHL


shl

Description:
Overview:
SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features:  Solid size up to 105 mm Back pull-out design Gland packed / Mechanical Seal 50 Hz / 60 Hz availability Also available in vertical execution

Applications:  Sludge Sewage Power material slurries Sugar factory waste

Specification: Delivery size up to 200 mm Capacity up to 800 m?/hr Head up to 90 m Temperature (-) 10 ?C to 140 ?C
Downloads:SHL PDF

NS


ns_img

Description:
Overview:
These are single stage, single suction pumps with overhung non-clogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint.

Features:  Non-clog two vane or single vane enclosed impeller Permissible solid size up to 85 mm Gland packed / Mechanical seal 50 HZ / 60 HZ availability

Applications:  Effluents Raw Sewage Storm Water Waste Water

Specification: Delivery size from 40 mm to 200 mm Capacity up to 750 m/hr Head up to 48 m Temperature (-) 10?C to 90?C
Downloads:NS PDF

NS


ns_img

Description:
Overview:
These are single stage, single suction pumps with overhung non-clogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint.

Features:  Non-clog two vane or single vane enclosed impeller Permissible solid size up to 85 mm Gland packed / Mechanical seal 50 HZ / 60 HZ availability

Applications:  Effluents Raw Sewage Storm Water Waste Water

Specification: Delivery size from 40 mm to 200 mm Capacity up to 750 m/hr Head up to 48 m Temperature (-) 10?C to 90?C
Downloads:NS PDF

MF


mf

Description:
Overview:
These low head high capacity pumps can be either gland packed or mechanically sealed. Delivery options can be of either horizontal or vertical. These are majorly used in air conditioning, irrigation, drainage and storm water. Delivery size can vary from 200 mm to 650 mm.

Features:  Low head, high capacity pumps Gland packed / Mechanical Seal 50HZ / 60 HZ availability Option available in horizontal as well as vertical delivery position

Applications:  Drainage Storm water Irrigation Air-conditioning

Specification: Delivery size up to 650 mm Capacity up to 7000 m? /hr Head up to 30 m Temperature (-) 5 ?C to 140 ?C
Downloads:MF PDF

DB


db

Description:
Overview:
With a back pull out design these pumps are gland packed or mechanically sealed and are used for air conditioning, booster service, fire fighting and sprinkler system. Delivery size varies from 32 mm to 150 mm.

Features:  Conforming to DIN 24255 Back pull-out design Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Air Conditioning Sprinkler systems Fire fighting Booster service

Specification: Delivery size up to 150 mm Capacity up to 550 m? /hr Head up to 100 m Temperature (-) 10 ?C to 100 ?C
Downloads:DB PDF

KPD


kpd

Description:
Overview:
These pumps are developed for process applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.

Features:  Conforming to DIN 24256 and ISO 2858 Back pull-out design Generally conforming to API 610 Gland Packed / Mechanical Seal Also available in vertical execution

Applications:  Air-Conditioning Condensate Extraction Distilleries Edible Oil, Sugar, Textile and Process Industries Water Treatment Plants

Specification: Delivery size up to 200 mm Capacity up to 2200 m? /hr Head up to 150 m Temperature up to (-) 50 ?C to 350 ?C
Downloads:KPD PDF

NS


ns_img

Description:
Overview:
These are single stage, single suction pumps with overhung non-clogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint.

Features:  Non-clog two vane or single vane enclosed impeller Permissible solid size up to 85 mm Gland packed / Mechanical seal 50 HZ / 60 HZ availability

Applications:  Effluents Raw Sewage Storm Water Waste Water

Specification: Delivery size from 40 mm to 200 mm Capacity up to 750 m/hr Head up to 48 m Temperature (-) 10?C to 90?C
Downloads:NS PDF

SHS


shs

Description:
Overview:
Kirloskar SHS is sump pump for solid handling application. It is suitable for pit depth upto 9 metre.

Features:  Features - coming soon

Applications:  Liquids with solids in suspension Sludes & pulpy material Industrial waste handling Liquid containing fibrous & powdered material Coal tar Effluent

Specification: Delivery size 50 to 300 mm Capacity Head Pit Depth up to 9 m
Downloads:SHS PDF

BHR/ BHQ/ BHM/ BHMa/ BHA


BHR BHQ BHM BHK img

Description:
Overview:
Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features:  Vibration-free performance Low submergence No priming required Dry pit/Wet pit arrangement available Direct drive/Right angle gear drive Impeller pull-out/Non-pull-out Bowl pull-out/Non-pull-out Gland packed / Mechanical seal 50Hz / 60Hz availability

Applications:  Water supply Pumps Irrigation Pumps Cooling tower Thermal and Nuclear power plants Steel, Cement industries Refineries Sea water on off-shore platforms Condensate extraction Fire fighting Pumps Flood control Dry Docks

Specification: Delivery size up to 2200 mm Capacity up to 40,000 m3 /hr Head up to 200 m

NS


ns_img

Description:
Overview:
These are single stage, single suction pumps with overhung non-clogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint.

Features:  Non-clog two vane or single vane enclosed impeller Permissible solid size up to 85 mm Gland packed / Mechanical seal 50 HZ / 60 HZ availability

Applications:  Effluents Raw Sewage Storm Water Waste Water

Specification: Delivery size from 40 mm to 200 mm Capacity up to 750 m/hr Head up to 48 m Temperature (-) 10?C to 90?C
Downloads:NS PDF

MF


mf

Description:
Overview:
These low head high capacity pumps can be either gland packed or mechanically sealed. Delivery options can be of either horizontal or vertical. These are majorly used in air conditioning, irrigation, drainage and storm water. Delivery size can vary from 200 mm to 650 mm.

Features:  Low head, high capacity pumps Gland packed / Mechanical Seal 50HZ / 60 HZ availability Option available in horizontal as well as vertical delivery position

Applications:  Drainage Storm water Irrigation Air-conditioning

Specification: Delivery size up to 650 mm Capacity up to 7000 m? /hr Head up to 30 m Temperature (-) 5 ?C to 140 ?C
Downloads:MF PDF

RKB


rkb

Description:
Overview:
RKB is a multistage centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors.

Features:  Gland Packed / Mechanical Seal 50 Hz / 60 Hz availability

Applications:  Fire-fighting Booster Service Mine Dewatering Boiler feed

Specification: Delivery size up to 250 mm Capacity up to 850 m3 /hr Heads up to 850 m Temperature (-) 40 ?C to 140 ?C
Downloads:RKB PDF

BHR/ BHQ/ BHM/ BHMa/ BHA


BHR BHQ BHM BHK img

Description:
Overview:
Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features:  Vibration-free performance Low submergence No priming required Dry pit/Wet pit arrangement available Direct drive/Right angle gear drive Impeller pull-out/Non-pull-out Bowl pull-out/Non-pull-out Gland packed / Mechanical seal 50Hz / 60Hz availability

Applications:  Water supply Pumps Irrigation Pumps Cooling tower Thermal and Nuclear power plants Steel, Cement industries Refineries Sea water on off-shore platforms Condensate extraction Fire fighting Pumps Flood control Dry Docks

Specification: Delivery size up to 2200 mm Capacity up to 40,000 m3 /hr Head up to 200 m

SCT


sct ext

Description:
Overview:
These are horizontally axially split casing, single stage, double suction or single suction pumps with horizontal shaft and detachable stuffing box called insert with horizontal axially split volute type. The impeller is accurately balanced by double or single suction. These pumps are used in handling water with slight impurities, petroleum refineries, conditioning and refrigeration system and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water/Liquids with slight impurities Petroleum refineries Air-conditioning and refrigeration systems Fire protection systems and mining Pump axis horizontal or vertical

Specification: Delivery size up to 350 mm Capacity up to 4500 m3 /hr Head up to 330 m Temperature (-) 10 ?C to 100 ?C
Downloads:SCT PDF

SCT Extended


sct ext

Description:
Overview:
These are horizontally axially split casing, single stage, double suction or single suction pumps with horizontal shaft and detachable stuffing box called insert with horizontal axially split volute type. The impeller is accurately balanced by double or single suction. These pumps are used in handling water with slight impurities, petroleum refineries, conditioning and refrigeration system and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water/Liquids with slight impurities Petroleum refineries Air-conditioning and refrigeration systems Fire protection systems and mining Pump axis horizontal or vertical

Specification: Delivery size up to 350 mm Capacity up to 4500 m3 /hr Head up to 330 m Temperature (-) 10 ?C to 100 ?C

DSM


split dsm dsmt

Description:
Overview:
These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting

Specification: Delivery size up to 150 mm Capacity up to 470 m3 /hr Head up to 180 m Temperature (-) 10 ?C to 90 ?C
Downloads:DSM PDF

DSMT


split dsm dsmt

Description:
Overview:
These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting

Specification: Delivery size up to 150 mm Capacity up to 470 m3 /hr Head up to 180 m Temperature (-) 10 ?C to 90 ?C
Downloads:DSMT PDF

UP / UPL / UPH / UP (T)


split up upl uph

Description:
Overview:
These pumps are gland packed and have mechanical seal. These are mainly used in water supply, irrigation, power plants and can have delivery size up to 1100 mm.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water Supply Irrigation Air-conditioning Power plants Paper, Sugar, Textile mills Fire fighting

Specification: Delivery size up to 1100 mm Capacity up to 20,000 m? /hr Head up to 160 m Temperature (-) 10 ?C to 90 ?C

I-HT


iht

Description:
Overview:
iHT pumps are horizontal split case single/double stage centrifugal pumps. All single stage pumps are provided with double suction type impeller. Both single stage/double stage pumps are fitted with DIN 24960 cavity mechanical seal. The impeller/s is/are centrally placed on a sturdy designed shaft and the entire rotating assembly is dynamically balanced to provide a smooth, trouble free, longer and efficient operation.

Features:  Highly efficient - low operation cost Compact size and less floor space Low down time - quickly fixable Low prime mover cost Lowest pumping - project cost Dual Drive to reduce downtime

Applications:  Suitable for Fire fighting Primary & secondary HVAC application High pressure boosting system Dewatering in mines Cooling tower Recirculation Desalination Water supply Paper plant Steel plant for high pressure injection Sugar plant Industrial utility water application

Specification: Delivery Sizes Upto 300 mm Discharge 30-1300 m3 /hr Head 30 to 250 m Speed 2900 rpm Temperature 8 0 C - 90 0C
Downloads:I-HT PDF

KPD


kpd

Description:
Overview:
These pumps are developed for process applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.

Features:  Conforming to DIN 24256 and ISO 2858 Back pull-out design Generally conforming to API 610 Gland Packed / Mechanical Seal Also available in vertical execution

Applications:  Air-Conditioning Condensate Extraction Distilleries Edible Oil, Sugar, Textile and Process Industries Water Treatment Plants

Specification: Delivery size up to 200 mm Capacity up to 2200 m? /hr Head up to 150 m Temperature up to (-) 50 ?C to 350 ?C
Downloads:KPD PDF

DBL


dbl1

Description:
Overview:
These pumps find wide applications in water transfer, water supply, irrigation, agriculture, farms, sprinkler, domestic house hold requirements, building and construction and general industry. High efficiency, robust case construction of cast iron, impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps. Developed by experienced pump engineers of KBL?a leading manufacturer, dealer and distributor of pumps which are designed to perform as per the actual service conditions.

Features:  Back pull-out design Gland Packed / Mechanical Seal 50 Hz / 60 Hz availability

Applications:  Aqua culture Water supply Irrigation Sugar Industries

Specification: Delivery size up to 300 mm Capacity up to 1900 m? /hr Head up to 35 m Temperature (-) 10 ?C to 90 ?C
Downloads:DBL PDF

SHM


shm shs

Description:
Overview:
SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features:  Solid size up to 105 mm Back pull-out design Gland packed / Mechanical Seal 50 Hz / 60 Hz availability Also available in vertical execution

Applications:  Sludge Sewage Power material slurries Sugar factory waste

Specification: Delivery size up to 200 mm Capacity up to 800 m?/hr Head up to 90 m Temperature (-) 10 ?C to 140 ?C
Downloads:SHM PDF

SHL


shl

Description:
Overview:
SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features:  Solid size up to 105 mm Back pull-out design Gland packed / Mechanical Seal 50 Hz / 60 Hz availability Also available in vertical execution

Applications:  Sludge Sewage Power material slurries Sugar factory waste

Specification: Delivery size up to 200 mm Capacity up to 800 m?/hr Head up to 90 m Temperature (-) 10 ?C to 140 ?C
Downloads:SHL PDF

KPD


kpd

Description:
Overview:
These pumps are developed for process applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.

Features:  Conforming to DIN 24256 and ISO 2858 Back pull-out design Generally conforming to API 610 Gland Packed / Mechanical Seal Also available in vertical execution

Applications:  Air-Conditioning Condensate Extraction Distilleries Edible Oil, Sugar, Textile and Process Industries Water Treatment Plants

Specification: Delivery size up to 200 mm Capacity up to 2200 m? /hr Head up to 150 m Temperature up to (-) 50 ?C to 350 ?C
Downloads:KPD PDF