Logo

Infrastructure

RKB


no image

Description:
Overview:
RKB is a multistage centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors.

Features:  Gland Packed / Mechanical Seal 50 Hz / 60 Hz availability

Applications:  Fire-fighting Booster Service Mine Dewatering Boiler feed

Specification: Delivery size up to 250 mm Capacity up to 850 m3 /hr Heads up to 850 m Temperature (-) 40 ?C to 140 ?C
Downloads:RKB PDF

MN/MLA


no image

Description:
Overview:
These are single suction, horizontal shaft, high pressure multistage pumps, consisting of ring section diffuser casings bolted between suction and delivery casing with enclosed type impeller. These are ideal for sprinkler irrigation, fire-fighting, water supply in high rise buildings and so on.

Features:  Gland packed / Mechanical seal 50Hz / 60 Hz availability

Applications:  Irrigation Fire-fighting Booster Service Mine Dewatering

Specification: Delivery size up to 300 mm Capacity up to 1000 m3 /hr Head up to 750 m Temperature (-) 10 ?C to 140 ?C
Downloads:MN/MLA PDF

MSMO


no image


Features: 
  • Substantial saving on construction of pump house.
  • More building space to utilize/sell.
  • Multi outlet varient reduces the necessity of multiple pumps for different head requirements
  • Less pipe works and valves
  • No water storage tank on intermediate floors.
  • Low product and maintainence cost


Specification:
  • Floor Range: 700m3/hr(3082 US)
  • Head Range: 500 meters(1640 ft)
  • No of outlets : upto 5 nos
  • Type of execution : Both horizontal and vertical.
  • STD MOC(Casing/impeller/shaft): Ci/Bronze/SS
  • Available in both gland pack/Mechanical seal
  • 50hz/ 60hz availability.
Downloads:MSMO PDF

DB


no image

Description:
Overview:
With a back pull out design these pumps are gland packed or mechanically sealed and are used for air conditioning, booster service, fire fighting and sprinkler system. Delivery size varies from 32 mm to 150 mm.

Features:  Conforming to DIN 24255 Back pull-out design Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Air Conditioning Sprinkler systems Fire fighting Booster service

Specification: Delivery size up to 150 mm Capacity up to 550 m? /hr Head up to 100 m Temperature (-) 10 ?C to 100 ?C
Downloads:DB PDF

CE


no image

Description:
Overview:
These pumps are of single stage with back pull out type suitable for 3500 rpm. These are either gland packed or mechanically sealed and delivery size can be up to 125 mm. These are very useful in air conditioning, water supply, fire-fighting and booster services.

Features:  Confirming to DIN 24256 and ISO 2858 Single stage with back pull-out type design Suitable for 3500 rpm Gland Packed / Mechanical Seal

Applications:  Air conditioning Fire fighting Booster services Water supply Sprinkler system Handling clear and turbid water up to 3000 ppm

Specification: Delivery size up to 125 mm Capacity up to 660 m? /hr Head up to 100 m Temperature up to (-) 10 ?C to 140 ?C
Downloads:CE PDF

CPHM


no image

Description:
Overview:
These pumps can be driven by electric motor or engine. The impellers are of enclosed type and are balanced statically and dynamically. The casing has axial suction and top centre line delivery. Smooth hydraulic passages ensure high efficiency.

Features:  Conforming to DIN 24256, ISO 2858 Back pull-out design Gland Packed / Mechanical Seal 50 Hz / 60 Hz availability

Applications:  Booster Service Fire fighting Air-conditioning

Specification: Delivery size up to 200 mm Capacity up to 750 m3 /hr Head up to 150 m Temperature (-) 30 ?C to 90 ?C
Downloads:CPHM PDF

GK


no image


Features:  GK Pumps are conforming to ISO: 5199 & dimensionally are fully conforming to ISO 2858 / EN: 22858. These pumps are horizontal back pullout design, radially split, single stage, centrifugal end suction volute with top centerline delivery. Pump feet are 4 integrally cast with delivery casing. Impeller is of an enclosed type. Bearing housing is fitted with a support foot. Pump shaft is supported by grease lubricated anti friction deep groove ball bearings as a standard scope of supply. Owing to its back pull out design, complete driving unit can be withdrawn from the driving end, without disturbing suction and delivery pipelines. The motor too remains in the position, if spacer coupling is used. Pumps are suitable for belt drive application with plummer block arrangement.

Applications:  GK pumps are mainly used for clean and clear liquids which are free from suspended solids particles. Few of the applications are as below:
1. Water supply.
2. Sprinkling.
3. Air conditioning.
4. Industrial water.
5. Swimming pool water.
6. Hot water.
7. Fire fighting.
8. Irrigation.
9. Drinking water/Potable water.
10. Cooling water.
11. Condensate .
12. Clear juice.

Downloads:GK PDF

iHT


no image

Description:
Overview:
iHT pumps are horizontal split case single/double stage centrifugal pumps. All single stage pumps are provided with double suction type impeller. Both single stage/double stage pumps are fitted with DIN 24960 cavity mechanical seal. The impeller/s is/are centrally placed on a sturdy designed shaft and the entire rotating assembly is dynamically balanced to provide a smooth, trouble free, longer and efficient operation.

Features:  Highly efficient - low operation cost Compact size and less floor space Low down time - quickly fixable Low prime mover cost Lowest pumping - project cost Dual Drive to reduce downtime

Applications:  Suitable for Fire fighting Primary & secondary HVAC application High pressure boosting system Dewatering in mines Cooling tower Recirculation Desalination Water supply Paper plant Steel plant for high pressure injection Sugar plant Industrial utility water application

Specification: Delivery Sizes Upto 300 mm Discharge 30-1300 m3 /hr Head 30 to 250 m Speed 2900 rpm Temperature 8 0 C - 90 0C
Downloads:IHT PDF

UP


no image

Description:
Overview:
These pumps are gland packed and have mechanical seal. These are mainly used in water supply, irrigation, power plants and can have delivery size up to 1100 mm.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water Supply Irrigation Air-conditioning Power plants Paper, Sugar, Textile mills Fire fighting

Specification: Delivery size up to 1100 mm Capacity up to 20,000 m³ /hr Head up to 160 m Temperature (-) 10 °C to 90 °C
Downloads:UP PDF

DSM


no image

Description:
Overview:
These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting

Specification: Delivery size up to 150 mm Capacity up to 470 m3 /hr Head up to 180 m Temperature (-) 10 ?C to 90 ?C
Downloads:DSM PDF

FM Approved UL Listed Fire Fighting Set


no image

Description:
Overview:
Safety is not a matter of chance; it requires a conscious and continuous effort to keep our near and dear ones safe. Fire hazards have been happening since man first discovered fire by rubbing two stones together. With evolution, man has also learned some full-proof ways to protect himself from such vulnerabilities. Today every project - whether residential or commercial, needs to house a fire fighting system, rendered mandatory by regulation. It includes an intricate plan of water storage, pipe network, sprinklers or hydrants, a pumping system with easy accessibility and operation across the length and breadth of the project. The most important part of any fire protection package is its reliability and durability, since it is the first defence for anybody to secure themselves against a fire outbreak. Hence, it is a well thought out decision to house an FM approved and UL Listed Fire Fighting set. A lot of properties do rely on external water sources or pump to maintain the adequate water supply and system pressure to douse the fire. An FM approved fire fighting system is rigorously tested for efficacy of its driver pump and controller, to ensure it withstands the pressure and performs during each certification drill. Pump tests are done to ensure the flow and water discharge across pipe network, and suction lift tests ensure the performance in ‘less than ideal water pressure’ scenario. Motor and fire controller is tested in harsh and extreme conditions to check its threshold and whether it complies with the required standards. FM approval standards and audits are devised to evaluate these complex fire fighting systems performance in difficult conditions. Once FM approved and UL listed, you can be sure the fire fighting system will perform its part whenever called upon. Vijay Engineering and Machinery Company (VEMC) is one of the pioneers in providing electromechanical, engineering and allied equipments. VEMC also deals in FM approved and UL listed fire fighting systems which can ensure adherence to stringent safety standards with highest level of quality and dependability on a continuous basis.




Containerized Firefighting system


no image

Description:
Overview:
Each Containerized Fire System, a pre-packaged pump house, is delivered to site complete with the pumps and with the necessary pipe work, valves, wiring, heating, lighting and drainage, all packaged within in an insulated steel enclosure and mounted on a structural base plate.

Features:  Containerized Fire System offers several key benefits: ? Reduced labor requirements/costs on site ? Reduced ground-works ? All are fully assembled and pre-tested in a quality controlled environment


Specification: The installation-to-operation time is minimal. Our enclosed systems are typically built as an integrated pump and control centre with: - Diesel engine - All the required controllers - In-house piping - Fittings - Interconnected wiring - A complete installation that meets the requirements of UL, FM, NFPA 13 and NFPA 20

Pressure Booster System/ Hydro-Pneumatic System/ HYPN System


no image

Description:
Overview:
Pressure Boosting Hydro-Pneumatic System (HYPN) Types of Systems: Constant Speed System – FX : Tank Filling Water Transfer, Residential housing, Small size commercial – Residential buildings Cascade system – MX (Only 1 VFD common to all pumps) : Medium size commercial – Residential buildings, Demand based industrial applications All Pump VFD system – EX ( all pumps having their individual VFD) : Townships, Hospitals, Airports, Malls, Metros, Demand based industrial applications

Features:  Pumps: Long & Short Coupled Pumps, Single & Double Suction Pumps Vertical Inline Single & Multistage Pump Motors: EFF2, EFF1 & Higher Efficient Control Panel: Wall & floor mounted panels Energy Saving and Efficiency Sustainable Coatings: Glass flake coating on Pumps, Valves, Tanks, and Pipes etc. Accessories: Skid (Suction and Discharge header, NRVs, Isolating Valves, Pressure Switch/ Pressure Transmitter), Pressurised tank, Solenoid valves, Float switches



KPD


no image

Description:
Overview:
These pumps are developed for process applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.

Features:  Conforming to DIN 24256 and ISO 2858 Back pull-out design Generally conforming to API 610 Gland Packed / Mechanical Seal Also available in vertical execution

Applications:  Air-Conditioning Condensate Extraction Distilleries Edible Oil, Sugar, Textile and Process Industries Water Treatment Plants

Specification: Delivery size up to 200 mm Capacity up to 2200 m? /hr Head up to 150 m Temperature up to (-) 50 ?C to 350 ?C
Downloads:KPD PDF

ICP


no image

Description:
Overview:
i-CP pumps dimensionally conform ISO:2858. These pumps are horizontal, radially-split, single stage, centrifugal end suction volute with top centreline delivery. The pump feet are integrally cast with the delivery casing. The impeller is of enclosed type. The pump shaft is supported by pre-lubricated anti friction sealed bearings as a standard scope of supply. These are widely used in Chemical industries, food and beverages industries, off sites of petro chemicals and refineries.

Features:  Pump without mechanical seal & without gland packing arrangement Sealing/flushing water not required Self venting design Pump with back pull out design Conforming to ISO 2858 standard Pump is sturdy yet light in weight Shaft is fully protected from liquid Widely interchangeable components Models available in 1450 & 2900 RPM

Applications:  iCP Pumps suitable for: Light chemicals like caustic soda, weak acids etc. Food & Beverage industries (Sugar, Vegetable oils, etc.) Hot water, Brine, DM water, Lime water, etc.

Specification: Delivery up to 180 m3 /hr Head up to 55 m Temperature up to 95 ?C
Downloads:ICP PDF

DBL / MF


no image

Description:
Overview:
These pumps find wide applications in water transfer, water supply, irrigation, agriculture, farms, sprinkler, domestic house hold requirements, building and construction and general industry. High efficiency, robust case construction of cast iron, impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps. Developed by experienced pump engineers of KBL?a leading manufacturer, dealer and distributor of pumps which are designed to perform as per the actual service conditions.

Features:  Back pull-out design Gland Packed / Mechanical Seal 50 Hz / 60 Hz availability

Applications:  Aqua culture Water supply Irrigation Sugar Industries

Specification: Delivery size up to 300 mm Capacity up to 1900 m? /hr Head up to 35 m Temperature (-) 10 ?C to 90 ?C
Downloads:DBL / MF PDF

UP / UPH / UPM


no image

Description:
Overview:
These pumps are gland packed and have mechanical seal. These are mainly used in water supply, irrigation, power plants and can have delivery size up to 1100 mm.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water Supply Irrigation Air-conditioning Power plants Paper, Sugar, Textile mills Fire fighting

Specification: Delivery size up to 1100 mm Capacity up to 20,000 m /hr Head up to 160 m Temperature (-) 10 ?C to 90 ?C

SCT / SCT


no image

Description:
Overview:
These are horizontally axially split casing, single stage, double suction or single suction pumps with horizontal shaft and detachable stuffing box called insert with horizontal axially split volute type. The impeller is accurately balanced by double or single suction. These pumps are used in handling water with slight impurities, petroleum refineries, conditioning and refrigeration system and so on.

Features:  Gland packed / Mechanical seal 50HZ / 60 HZ availability

Applications:  Water/Liquids with slight impurities Petroleum refineries Air-conditioning and refrigeration systems Fire protection systems and mining Pump axis horizontal or vertical

Specification: Delivery size up to 350 mm Capacity up to 4500 m3 /hr Head up to 330 m Temperature (-) 10 ?C to 100 ?C
Downloads:SCT / SCT PDF

EXTENDED







IHT


no image

Description:
Overview:
iHT pumps are horizontal split case single/double stage centrifugal pumps. All single stage pumps are provided with double suction type impeller. Both single stage/double stage pumps are fitted with DIN 24960 cavity mechanical seal. The impeller/s is/are centrally placed on a sturdy designed shaft and the entire rotating assembly is dynamically balanced to provide a smooth, trouble free, longer and efficient operation.

Features:  Highly efficient - low operation cost Compact size and less floor space Low down time - quickly fixable Low prime mover cost Lowest pumping - project cost Dual Drive to reduce downtime

Applications:  Suitable for Fire fighting Primary & secondary HVAC application High pressure boosting system Dewatering in mines Cooling tower Recirculation Desalination Water supply Paper plant Steel plant for high pressure injection Sugar plant Industrial utility water application

Specification: Delivery Sizes Upto 300 mm Discharge 30-1300 m3 /hr Head 30 to 250 m Speed 2900 rpm Temperature 8 0 C - 90 0C
Downloads:IHT PDF

KCIL / KSIL


no image

Description:
Overview:
Kirloskar KSIL, KCIL are vertical multistage centrifugal pumps. The in-line design enables installation of the pump in horizontal one pipe systems. The suction and discharge ports are of same dimension and are in the same horizontal plane. This arrangement insures a compact design and calls for a simpler piping systems.

Features:  Energy Efficient Compact and Aesthetical Design Corrosion Resistant Reliable Sealing Ease of Maintenance Durable Light Weight Low Noise Level

Applications:  Water Supply Industrial Pressure Boosting Liquid Transfer Water Treatment Building Industry Dairy Irrigation Small Power Plants

Specification: Delivery size 32 mm, 42 mm, 65 mm Capacity from 0.4 to 28 m?/hr Head 10 to 249 m
Downloads:KCIL / KSIL PDF

KDS+


no image

Description:
Overview:
These pumps can withstand voltage fluctuations from 180-240 volts. These have dynamically balanced rotating parts to ensure minimum vibrations. Cast iron impeller, delivery casing, these pumps are suitable for gardening and small farm irrigation, agri for clear water handling, water supply for agri, used in apartments, buildings and hotels.

Features:  High speed monoblock pump Flatter efficiency curves for efficient operation Designed for automatic air release during priming Dynamically balanced rotating parts ensuring minimum vibration during running Gland Packed / Mechanical Seal

Applications:  Air-conditioning Refrigeration Cooling towers Industries for clear water handling at higher pressures Fire fighting

Specification: Head range Upto 76 m Discharge range Upto 72 lps Power rating 0.37 ? 22 kW (0.5 ? 30 HP) Voltage range 300 ? 440 V (3 phase)
Downloads:KDS+ PDF

KDT


no image

Description:
Overview:
These pumps can withstand voltage fluctuations from 180-240 volts. These have flatter efficiency curve for efficient operation. These are designed to prevent overloading and motor burning and automatic air release during priming.

Features:  Flatter efficiency curve for efficient operation Designed to prevent overloading and motor burning Designed for automatic air release during priming Efficiency at par with international pumps Dynamically balanced rotating parts ensuring minimum vibration during running Class ?B?/ ?F? insulation Replaceable wearing parts Models with IP55 protection

Applications:  Air conditioning system Refrigeration Cooling towers Fire fighting Industries for clear water handling at high pressures

Specification: Capacity up to 20 lps Head up to 110 m Power rating 3.7 to 15 kW (5 to 20 HP) Voltage 300-440 V (Three Phase)
Downloads:KDT PDF